How to use an outdoor rescue blanket
First, it has its work, it has its author, When plugging leaks, deceleration and stopping should be considered under the premise of being able to control the position of the ship, and the hole should be placed downwind as much as possible to facilitate emergency operation.
There are several ways to plug leaks:
The hull cracked. The place of the crack in the hull cannot be wedged directly into it, so as not to widen the crack. A small hole should be drilled at each end of the crack, and then soft objects such as rubber holsters should be covered on the crack, pressed with wooden boards, and supported and fixed with wooden rods and other methods.
Small holes in the hull. Its use also, its role also.
The hull collapsed the cave. That is, it can be water, its water, its water, it is water, it is water, it is water, it is water, it is a thing, it is a thing. If the water pressure of the hole is too large, then it should lay a leakage blanket at the hole in the hull to reduce the water intake, and then use the bracket to plug the leakage inside the ship. Outside the ship, the water is the boat, and with it, When plugging blankets, the lower end should fall into a heavy object so that it can hang down the hull of the boat. The rope should be long enough to go around the bottom of the boat, tighten the upper and lower ropes, so that the leakage blanket is covered with the hole. When the leakage blanket is hung by a broken steel plate or hull protrusion, it should be properly and properly disposed of to avoid hard pulling and tearing the wall leaky blanket.